China high quality 1 Series Pto Drive Shaft Interchanges with CZPT & Pavesi Driveline drive shaft center bearing

Product Description

Product Description

We are partners of Bondioli&Pavesi and can manufacture Pto shafts similar to theirs. Our production line adopts the most advanced technology and equipment to ensure that the Pto shafts we produce have high-quality quality and performance. Our team consists of a group of experienced and skilled craftsmen who treat every detail with extremely high standards

Product Parameters

Tractor Yoke
Safety Slide Lock 
Repair Kit – *19-15094
Quick Disconnect

Repair Kit – *130 0571 8

Dim. “A” Dim. “B”  Dim. “A” Bore Dim. “B” 
1 3/8″ x 6 Spl 3.86″ 1 1/8″ x 6 Spl. 3.62″
1 3/8″ x 21 Spl. 3.86″ 1 3/8″ x 6 Spl. 3.54″
    1 3/8″ x 21 Spl 3.54″
Cross & Bearing Kit
(R-Kit) (Recommended 8 hour grease interval) Extended Lubrication(E-Kit)(Recommended 50 hour grease interval)
Dim. “A” Dim. “B” Dim. “A” Dim. “B”
.87″ 2.13″ .87″ 2.13″
Inner Profile Yoke

 

 

Outer Profile Yoke

 

 

Dim. “A” Dim. “B” Dim. “A” Dim. “B”
1.08″ 2.60″ 1.30″ 2.60″
Inner Tube

 

 

Outer Tube

 

 

Length m Length in Length m Length in
1.5 59.06″ 1.5 59.06″
1.0 39.37″ 1.0 39.37″
Roll Pin
Dim. “A”=31”
Dim. “B”=1.97”
Implement Yoke
Shear PinDim. “A”=31”
Dim. “B”=1.97”
Pinhole=0.25″
Easy Lock Replacement Kit Dim. “A” Dim. “B” Standard Keyway
1.0″ 3.07″ 0.25″
1.25″ 3.07″ 0.25″
1.18″ 3.07″ 0.39″
Guard Chain Kit Guard

 

Order Bearings As Required

Fits Overall Driveline Length Bearing Kit (2-per kit)
Driveline
Overall Comp.
Length Dim. “A”
Max Running Length Tractor Yoke Implement Yoke
27″ 37″ 1 3/8″ x 6 Spl. QD 1 3/8″ x 6 Spl. QD
35″ 50″ 1 3/8″ x 6 Spl. QD 1 3/8″ x 6 Spl. QD
37″ 53″ 1 3/8″ x 6 Spl. QD 1 3/8″ x 6 Spl. QD
48″ 70″ 1 3/8″ x 6 Spl. QD  

 

Related products

Cross Kit/ Universal Joint

 

Tube

 

Shaft Shield Guard

 

Yoke

 

Torque Limiter

 

PTO Spline & Adaptor & Hub

Universal Coupling

 

Wide Angle Joint

 

 

Company Profile

As a China PTO shaft manufacturer, we have the following advantages:

  • High quality products: We use the most advanced technology and materials to ensure that the PTO shafts we produce have excellent quality and durability.
  • Comprehensive product line: Our PTO shafts cover a variety of types and sizes to meet the needs of different customers.
  • Customized service: We can produce customized PTO shaft products according to the specific needs of customers, thereby ensuring that customer requirements are met.
  • Fast delivery time: Our production line operates efficiently and can quickly respond to customer needs, ensuring rapid delivery of PTO shaft products.
  • Professional technical support: We have a professional technical team that can provide customers with various technical support and consulting services to ensure that customers receive the best solution.

 

We welcome you to our PTO shaft production factory in China. We are 1 of the largest China PTO shaft manufacturers , focusing on providing customers with high-quality and high-performance PTO shaft. We are an experienced manufacturer dedicated to producing high-quality PTO shafts to help customers successfully complete their various projects.
We are committed to using the most advanced technology and equipment to ensure that the PTO shafts we produce have excellent quality and reliability, to ensure that customers receive the best performance and service life. Our team is composed of experienced professionals who can tailor the PTO shaft to the customer’s needs to best meet their specific requirements.
In addition, our factory has a strict quality management system to ensure that each PTO shaft meets industry standards and passes all necessary quality tests. We have first-class after-sales service and will make every effort to ensure customer satisfaction.
We look CZPT to working with you and manufacturing high-quality PTO shafts for you to help your project achieve greater success. If you have any questions about our factory, please feel free to contact us.

 

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

air-compressor

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China high quality 1 Series Pto Drive Shaft Interchanges with CZPT & Pavesi Driveline   drive shaft center bearing		China high quality 1 Series Pto Drive Shaft Interchanges with CZPT & Pavesi Driveline   drive shaft center bearing
editor by CX 2023-05-15